Pumps - Filters & Strainers

!
MC WF-008
Weight: kg

Aquafilta cartridge Jabsco

MC WF-300
Weight: kg

Aquasmart cartridge Whale

MC WF-236
Weight: kg

Aquasource filter- Whale

MC WB-018
Weight: kg

Bilge Pump - 12 v Whale Supersub Smart

Low profile automatic bilge pump
The Smart Supersub bilge pump 650 has a low narrow design for confined spaces. The outlet and pump body rotate to suit your installation and the low power consumption means a longer battery life. The low profile strainer leaves the bilge almost dry. The Smart version comes with a built in float switch. 650 GPH. Hose connection: 19 mm (3/4"). Dimensions: 75 mm(H) x 54 mm(W) x 212 mm(L)
MC L102
Weight: kg

Bilge pump - Rule 800GPH - 3028 LPH 12 v

Up to 50 litres/minute (11 gallons/minute). Maximum
Up to 50 litres/minute (11 gallons/minute) Maximum recommended discharge head:  2m Outlet: 3/4'' (19 mm) hose tail Recommended Fuse Size: - 5 A (at 12 V) Dimensions: 95 mm high, 60 mm base diameter.
MC WP-130
Weight: kg

Bilge pump - Rule mate 500 12 v

The Rule RM500B is a fully automatic bilge pump incorporating field sensor technology that eliminates the need for a mechanical float switch. A great solution for a modern engine bay, the level sensor is sealed into the body of the pump and the pump is automatically activated when the sensor detects a 50mm level of water and switches off at 9mm.

• Connections: For 19mm (3/4") or 25mm (1") bore hose on inlet and outlet. Straight or 90deg Elbow.

• Dimensions: 112mm high, 130mm long, 73mm wide.

• Fuse Size: 4 (amp).

• Output: Up to 31 litres/minute (7 gallons/minute). Max. recommended discharge head 2m.

• Fully automated bilge pump with integral sensor.

• Back up feature to prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode.

• Compact pump for smaller vessels.

• Tough plastic body.

MC WS-005
Weight: kg

Bilge pump - Rule-A-Matic float switch 12 v

Auto float switch

Rule-a-Matic mercury free float switch. Pump turns on when water level reaches 51mm (2"), turns off when water level drops to 19mm (3/4"). Removable base for easy installation and maintenance. Rating: 14 amps (max) Voltage Input: 12 Manufacturers Part Number: CW35.
MC WP-105
Weight: kg

Bilge pump -Whale self venting submersible 12 v pump

The whale standard submersible pump is a simple, compact and economical solution. It has a long life and is very quiet with a low power consumption. An inexpensive way to update a manual to an electric system, it can be used with pressure and micro switch systems. It has a flow rate of 10 LPM and draws 2.4 amps.
MC WB-015
Weight: kg

Bilge Pump Whale Supersub 650 12v

The Supersub bilge pump 650 has a low narrow design for confined spaces. The outlet and pump body rotate to suit your installation and the low power consumption means a longer battery life. The low profile strainer leaves the bilge almost dry. 500GPH. Hose connection: 19mm (3/4"). Dimensions: 183mm(L) x 75mm(W). The Supersub bilge pump 650 has a low narrow design for confined spaces. The outlet and pump body rotate to suit your installation and the low power consumption means a longer battery life. The low profile strainer leaves the bilge almost dry. 500GPH. Hose connection: 19mm (3/4"). Dimensions: 183mm(L) x 75mm(W).
MC WF-001
Weight: kg

Jabsco Aqua filta complete

MC WS-003
Weight: kg
24174_80_60

Jabsco Inline Water Stainer 3/4" Hose

Fresh water pump inlet strainer. Prevents unnecessary pump breakdowns caused by particles in the water. Transparent housing and screw off top allows easy inspection and cleaning. 40 mesh stainless steel filter.
MC WS-001
Weight: kg

Jabsco Inline Water Strainer 1/2" BSPM

Fresh water pump inlet strainer. Prevents unnecessary pump breakdowns caused by particles in the water. Transparent housing and screw off top allows easy inspection and cleaning. 40 mesh stainless steel filter
MC WP-001
Weight: kg

Jabsco Par Max 12v pump

Jabsco PAR MAX 12 volt electric water pump instantaneous type, 11 litres per minute, 25 psi. Par Max 2.9 pressure controlled self priming water pump serving 2 or more outlets. Multi diaphragm design self primes to 1.8m vertical lift. Can be run dry without damage. Includes a bypass feature to provide a smooth, quiet flow without the need for an accumulator tank.
MC WS-014
Weight: kg

Pumpguard filter/strainer- Jabsco

15mm (1/2") External thread 90º inlet and direct plug into Jabsco Par-Max pump inlet port.

Fresh water pump inlet strainer. Prevents unnecessary pump breakdowns caused by particles in the water. Transparent housing and screw off top allows easy inspection and cleaning. 40 mesh stainless steel filter.
MC WP-125
Weight: kg

Rule 98B Shower Sump Pump

Rule 98B shower sump box, for discharge of shower/basin waste water. Easy to remove clip on lid and mounting.

• Connections: For 19mm (3/4") 25mm (1") or 29mm (1 1/8") bore hose on inlet and outlet. Straight or 90 deg Elbow.

• Dimensions: 230mm x 240mm x 130mm high.• Fuse Size: 5 (amp)

• Output: 50 litres/minute (11 gallons/minute) Max recommended discharge head 2.5m

• Contains Rule 800 Submersible • Pump controlled by a Rule-a-Matic float switch.

• Clip in, removable pump, strainer and cover allows easy cleaning and servicing •  Sealed clear screw-down cover.

• Integral non-return valve.

MC WP-054
Weight: kg

Whale Gulper 220 shower pump

Popular diaphragm pump, will run dry without damage and self priming up to 3m. Multi-directional head. Up to 14 litres per minute. Dimensions: 117mm x 173mm (including hose tails) x 273mm Connections Type: 19mm hose tails Fuse Requirement: 5A